- Model NO.: GRS-10D
- Working: Convection Mixer
- Application: Powder
- Application Area: Pharmaceutical
- Mixing Drum Shape: Drum
- Operating type: Continuous Operating
- Working Volume: 10 L
- Structure: with 3-Layer Structure
- Mixing Power: 6W
- Trademark: PF
- Specification: CE
- Mixer Type: Powder Mixer
- Stirring Type: Spiral
- Certification: ISO
- Layout Type: Horizontal
- Additional Capabilities: Milling
- Condition: New
- Material: SUS316L
- Work Volume: 5 L
- Rotate Speed: 0-1400 Rpm by Frequency in
- Transport Package: Wooden Case
- Origin: Zhejiang, China
This system is composed of emulsifying mixer boiler, oil-phase boiler, vacuum system, hydraulic system and electric control system as well as discharging device.
I. Emulsify mixer boiler: Working volume: 10 L, material: SUS316L, with dual purpose of electric heating and water-cooling;
Structure: With 3-layer structure, top dish and bottom dish. The top dish is connected to the tank body with flange between them. The bottom dish is connected with the tank body directly. The internal layer of tank
body is made of 3 mm thick SUS316L stainless steel and interior polished in
300 MESH (sanitary class). The middle layer of tank body is made of 3 mm
thick SUS304 stainless steel, working pressure 0.09 MPa, with two 450W electrical heating pipes. The external layer of tank body is made of 2 mm SUS304 stainless steel, and exterior polished in 300 MESH (sanitary class). All the welding seams shall be polished after rubdown, and as to the treatment interface, turned over edge arc transition is adopted. The insulating layer adopts rock wool for heat preservation. The tank body is attached with liquid feed inlet, solid feed port, vacuum hole, sight glass, temperature sensor, lamp and negative pressure sensor port.
II. Oil-phase boiler:
Work volume: 5 L
Structure: 3-layer type
Mixing power: 6W
Rotate speed: 0-1400 rpm by Frequency Inverter
Electric heating power: One 450W for the boiler
III. Mixing system: low-speed frame-type wall scraping mixer, with power: 0.37 KW, and rotating speed: 10-70 rpm. (Speed adjusted by frequency Inverter, and the mixing time is adjustable)
Inside paddle mixing: Power is 0.18KW, rotating speed 10-70 r/min
IV. Emulsifying homogenizing system: lower homogenizing emulsifying
structure is adopted for emulsifying mixing, with motor power: 0.75 KW, and
rotating speed: 0-3500 rpm. (Speed adjusted by frequency Inverter, and the mixing time is adjustable)
V. Vacuum system:
Adopting direct coupled rotary vacuum pump, with bleeding air flow
pumping speed 1,5L/S, motor power 120 W, and max. vacuum 10 Pa.
VI. Hydraulic system
Hydraulic control is adopted for lifting of boiler cover, and max. or min.
Point is controlled by limit switch.
VII. Electric control system
Mixing time set by time relay, heating temperature set by upper and lower
limit of temperature regulator, Apply Siemens electrical elements, PANASONIC frequency converter, and FUJI buttons.