2026 New High Speed Tablet Film Coater Coating Machine

Product Description

BG-50E Efficient coating machine  

Applications:

 

 

Main machine
the host: plc human-machine interface, high efficiency, energy saving, dust-free, no cross-contamination, easy to operate, easy to clean, low noise, high efficiency. the coated drugs: the coating layer is dry, uniform, solid, compact, smooth, and flat. the control system composed of plc and HMI is designed reasonably and the programming is flexible, which can adapt to various different pharmaceutical industrial needs and meet GMP requirements.
the tablets are turned over by the flow line guide plate, exchanging frequently, eliminating the phenomenon of tablets falling from a high place and colliding, and eliminating chipped edges and bumped edges to improve the yield.
 

Filter hot air machine
The air is inhaled by the centrifugal fan, reaches 100,000 level purification through the primary, middle and high tertiary filtration, and then through the heat exchanger (steam or electric heating), blown into the main engine drum, and the initial air filter device is added at the wind collecting port.

Dust removal exhaust machine
It is used to extract air from the host roller (with suction) and maintain a negative pressure in the work area. The exhaust outlet is equipped with a backflow prevention device, which closes the exhaust outlet before the machine is shut down to prevent the waste gas in the exhaust pipe from flowing back.

Constant Temperature Mixing Tank
Constant temperature mixing bucket adopts electric heating, with pneumatic agitator, compressed air as the power, stable speed, stepless speed regulation, stirring the medium evenly, at room temperature ~80ºC can be automatically controlled, easy to operate, safe and reliable, the whole is made of stainless steel, both inside and outside mirror polishing.

Spray gun
Quantity: one branch;For film coating, injection needle aperture diameter 1.0 or 1.2mm. 360-degree adjustable nozzle: The elliptical atomization surface can rotate 360 degrees to adjust the nozzle tail adjusting bolt according to the amount of feed to fine-tune the amount of spray
 

BT/S series peristaltic pump
BT / S series speed-regulating peristaltic pump not only has the functions of start and stop, speed regulation, full speed, direction and so on, but also improves the LCD Chinese display, adding the functions of multiple timing operation and suction, and can be easily connected with other devices through RS485 communication of MODBUS protocol. Running time, interval time and running times can be set.

Process parameters and technical performance

technical function	technical parameters	unit
capacity production	50	kg
Roller speed	2~18	r/min
Roller diameter	860	mm
Motor power of Main machine	1.1	kw
Hot-air machine flow	2010	m3/h
Motor power of Hot-air machine	0.75	kw
Air-Exhaust  machine Flow	3640	m3/h
Motor power of Air Exhaust machine	2.2	kw
compressed air	0.4	mpa
Electric heating type	20	kw
Steam heating type	60	kg

Technical Parameters
 

 

Basic working principle:

The tablets make complicated and constant track movement with easy and smooth turn frequent exchanging in a clean and closed drum of the film coating machine. The coating mixed round in the mixing drum are sprayed on tablets through the spray gun at the inlet unaction of the peristaltic pump. Meanwhile under the action of air exhaust and negative pressure 100,000 clean hot air supplied by the air exhaust cabinet is exhausted from the fan at the sieve meshes through tablets. So these coating mediums on the surface of tablets get dry forming a coat of firm, fine and smooth film. The whole process is finished under the control of PLC.

 

 

Coating machine's Overall renderings

 

 
Samples

 

Partial photos

Company Information