GHL series higt speed mixing granulator
The machine adopts horizontal cylinder structure, its structure reasonable.
Air filled seal shaft for to drive. When washing , it can be changed to water.
Fluidized Granulation, the granule is around ball shape. Its flow ability is good.
Compared to traditional process, 25% of adhesive can be reduced and the drying time is short.
The dry mixing time is 2 minutes and the granulating time is 1-4 minutes. Compared to the traditional process ,
4-5 times of efficiency is raised.
Dry mixing ,humid mixing and granulating are finished in the same sealed container. It is in conformity with the requirements of GMP.
The whole operation has strict safe and protective measures.
Jacket type might be adopted on request.
The powder raw material and adhesive in a cylinder are fully mixed at the bottom to become a humid soft material. Then it is cut by high-speed cutter and become uniform granules
|spec||capacity (kg/h)||hopper volume (L)||roll size (mm)||max roller prepressure (MPa)||max operation pressure of the hydraulic system (MPa)||roller and material conveying speed |
|40||5-20||3||Φ 120 × 40||6||8||inverter control|
|80||20-60||3||Φ 200 × 80||10||15||inverter control|
|120||30-100||5||Φ 200 × 120||10||15||inverter control|